Such a humane and characteristic heavy demand design immediately made the concrete mixing and towing pumping equipment enter a new market territory. However, in the face of the widespread use of diesel engine power, diesel engine failures often occur due to improper operation by operators. So, do you know that the following "habitual" operations are an important cause of frequent failures of your equipment?
● The diesel engine slammed the throttle after cold start;
● Cold start without load and warm running
● The diesel engine stops suddenly with load or immediately after the load is unloaded;
● The diesel engine continues to run when the engine oil is insufficient;
● Diesel engine runs when the amount of cooling water is insufficient or the temperature of cooling water and oil is too high;
● The diesel engine is running in a state where the cooling water and oil temperature are too low;
● Diesel engine runs under low oil pressure;
● Blind pursuit of overload (overload) operation;
● Diesel engine runs for a long time at idle speed;
● The diesel engine suddenly adds cooling water to the engine when there is no or little water and the temperature of the diesel engine is too high;
● Throttle the throttle before the diesel engine goes out.
The above precautions are very harmful to the stirring pump equipment. Everyone must avoid the use of concrete mixing pumping equipment
