Concrete Pouring Pump

Concrete Pouring Pump are used for Conveying floor heating lightweight foamed cement, mortar,fine aggregate concrete.all kinds of engineering construction in the plain concrete,fiber concrete.conveying or injection of refractory and thermal insulation material;conveying or jet of greening soil on the construction of ecological environment;conveying or injection of plain concrete and fiber concrete for all kinds of engineering construction.

 

Key Features of a Concrete Pouring Pump:

1. Pump Mechanism:

Hydraulic Pumps: Concrete pouring pumps are powered by hydraulic systems, which create the pressure needed to move concrete through hoses or pipelines.

Piston or Gear Pumps: Most concrete pouring pumps use either piston pumps or gear pumps. Piston pumps are the most common because they provide a steady, consistent flow of concrete, ensuring smooth operation.

The concrete is typically sucked into the pump through a hopper or suction port, and then forced through the discharge hose or boom.

 

2. Placement Methods:

Boom Pumps: These are equipped with a long, extendable arm (known as a boom) that can reach great heights and distances. The boom allows for precise placement of concrete at various locations, such as on upper floors of buildings, bridges, or even tunnels.

Line Pumps: These pumps use flexible hoses to transfer the concrete to the pour site. Line pumps are more portable and typically used for shorter distances or where a boom pump cannot be used, like tight spaces or lower-level pours.

Direct Pouring: In some cases, concrete can be pumped directly from the mixer to the pour site without the need for a boom or hoses. This is typically used in smaller pours or in areas with easy access.

 

3. Concrete Delivery and Flow:

Concrete pouring pumps provide continuous flow of concrete, which helps maintain a steady pour for slab, foundation, or other large pours.

They can pump low, medium, or high-slump concrete, depending on the pump's design and the type of concrete being used. Pumps are typically capable of handling thicker mixes, such as high-strength concrete, shotcrete (sprayed concrete), or self-leveling concrete.

 

4. Control Systems:

Modern concrete pouring pumps come with electronic control systems or PLC (Programmable Logic Controllers) for easy operation, adjustment, and monitoring.

Remote control options are often available, allowing the operator to control the pump and boom from a distance, improving safety and efficiency.

Many models also include automated pressure monitoring and concrete flow control, ensuring that the pump operates smoothly and prevents blockages or pressure fluctuations.

 

5. Mobility:

Concrete pouring pumps are available in mobile and stationary configurations:

Truck-mounted pumps (also known as truck-mounted boom pumps) are mounted on a truck chassis for easy transport around construction sites.

Trailer-mounted pumps are often used for smaller projects or areas where a boom pump would be impractical.

Stationary pumps are fixed in one location, and concrete is pumped through long hoses to the pouring site.

 

6. Pouring Capacity:

Concrete pouring pumps are available in various sizes and capacities, usually measured in cubic meters per hour (m³/h) or cubic yards per hour. The size and pumping capacity you choose will depend on the size and scale of your project.

 

Our Product advantage

1.Overall Hydraulic Commutation System: Little impact and Noise occurs during the commutation, a longer service life;

2.Intelligent power control system to regulate the engine speed automatically, for smooth and efficient operation;

3.Plunger pump with constant power, to ensure the efficiency of main engine;

4.Good sealing S-valve, installed with floating wear resistant ring;

5.High-quality wear resistant alloy components for long service-life;

 

Product parameter(specification):

 

MODEL: HBT80-16-110S/162RS
Max theoretic output				80m³/h
Max concrete pumping pressure				16Mpa
High and low valtage switchover				Yes
Hydraulic system				Double pump & double circuit opening
Main oil pump discharge				260ml/r(kawasaki)
Hydraulic system pressure				32MPa
Power supply				Electric motor	Diesel motor
Voltage				380V	/
Motor power				110KW	162KW
Motor speed				1475r/min
Distribution valve type				S pipe valve
Concrete conveying cylinder bore/stroke				Ф200/1862mm
Oil cylinder bore/stroke				Ф140/1650mm
Max aggregate size				40mm
Hopper Volume				0.80m³
Feeding height				1450mm
Max delivery vertical distance				150m
Max delivery horizontal distance				500m
Concrete slump				160-230mm
Hydraulic oil tank volume				420L
The radiator cooling type				Air cooling system
Hydraulic pump type				Ram pump
Outer dimensions(L*W*H)				6450*1900*2330mm
Total weight				6100kg

 

 

Product application:

 

 

Product details:

 

 

Deliver,shipping:

Packaging details---nude package,container or roro,or as your request

Port---changsha

 

Our service:

Warranty-Saner grants our clients a twelve-month-period(1 year) or 2000-hours warranty for any machine purchased from us.during the warranty period,in case the defect of material or workmanship has occurred with spare parts in normal operation,the defective part will be repaired or replaced free of charge as compensation,at our discretion.

 

FAQ:

Q:How long will your price be valid?

A:We are a tender and friendly supplier,never greedy on windfall profit,basically,our price remains stable through the year.we only adjust our price based on two situations:(1)the rate of USD:RMB varies significantly according to the international currency exchange rates;(2)manufacturers/factories adjusted the machine price.because of the increasing labor cost and raw material cost.

 

Q:How about the price?

A:As a manufactory,we could give you the best price than trade companies.

 

Q:What's your MOQ?

A:One set is ok for the trail order.

 

Hot Tags: concrete pouring pump, China concrete pouring pump manufacturers, suppliers, factory, High Pressure Concrete Pump